Die Casting For Medical Equipment Parts

Medical Equipment PartsDolin casting supplies all sorts of high-quality die casting aluminum parts for various industries. When it comes to medical industry, the production and inspection standards of our die casting medical equipment parts are much higher than other industries, since the quality of medical equipment concerns the safety of people’s health and lives.

Our ultimate aim is to help our customers save money while supplying them the high-quality medical equipment parts. In order to avoid any possible cost of trial and error, we utilize the most advanced simulation tool when designing molds. To ensure the highest quality, we adopt the most rigid inspection measurements from raw material to finished product. All of these efforts have helped us establish strategic business relationships with lots of named medical equipment manufacturers home and abroad.

Patient Bed Gearbox
Patient Bed Gearbox
Patient Bed Part
Patient Bed Part
Operation Table Gearbox
Operation Table Gearbox
Operation Table Part
Operation Table Part
Medical Device Base
Medical Device Base
Medical Device Case
Medical Device Case
Medical Device Bracket
Medical Device Bracket
Patient Bed Wheel Hub
Patient Bed Wheel Hub
The Base of Medical Robot
Medical Robot Base
Upper Arm of Medical Robot
Medical Robot Big Arm
Elbow Joint of Medical Robot
Medical Robot Elbow
Lower Arm of Medical Robot
Medical Robot Lower Arm

Why Choose Dolin Casting For Your Medical Eqipment Parts

-We Have The Most Advanced Engineering And Design Expertise

As is known, the yield and quality of die casting parts depends on the reasonability of molds design. Traditional method of die casting molds design depends on expertise and experiences which may causes lots of unpredictable trial and error cost. Of course these cost will be passed on to customers eventually. Nevertheless, how to avoid these unnecessary cost and save money for customers? Expertise combining mold flow simulation analysis is the best way at present.

At Dolin Casting, the producing of our top-quality die casting medical equipment parts starts with this most advanced molds design method. We had invested simulation tool to assist die casting molds design many years ago, while most of our competitors still used the traditional method.

The simulation tool provides a complete flow and thermal solution for our die casting molds design. The simulations provide us detailed insights into filling and solidification of die cast medical equipment parts, and help us optimize the designing to avoid the possible defects like gas porosity, blisters, cold shuts, short fill, cold flakes, thermal stresses, deformations, surface oxides, etc. With the help of simulations, we can accomplish the optimized the design without any trial and error. That’s why our die casting medical equipment parts are so competitive.

-We Implement The Most Rigid Quality Assurance Measurements

Quality assurance has been always at the top of our list of priorities, especially when it comes to die casting medical equipment parts. It is no coincidence that Dolin Casting has been consistently supplying high quality full-finished die casting medical equipment parts, since we implement and adhere to the most rigid quality assurance measurements to make sure every single batch of our medical equipment parts meet or exceed our customer’s expectations.

The quality of raw material used for die casting medical equipment parts is strictly controlled. It’s the common practice that all of our aluminum alloy ingots are purchased from ISO 9001 registered sources accompanied with test reports, and every batch of raw material must go through incoming inspection prior to putting into production.

We work out and carry out our inspection plans in every step of production process. From alloy melting, casting, heat treatment to finishing, process inspection and on-site inspection go along with the entire production process. All the inspection reports for each run of our medical parts are traceable and will be remained for at least 48 months.

The quality of medical devices parts concerns the safety of patients’ lives. Except for routine testing, 100% of our die cast medical devices parts must go through NDT (nondestructive testing) to ensure no possible defects inside the castings.

Why Die Cast Medical Devices Parts?

For medical parts, the durability and reliability is of extreme importance. In all metal thermoforming processes, only die casting process is the perfect fit to produce medical equipment parts, as the advantages it has.

–Superior Strength and Rigidity

With the same dimensions and weights, die casting parts are stronger and more rigid than parts produced by other thermoforming processes. That means die casting part has the best strength to weight ratio, of which is the essential characteristics today’s medical equipment parts should have.

–Superior Durability and Stability

Die casting parts are much more durable and dimensionally stable, of which increase the reliability of the medical equipment.

–Ease for Mass Production

Die casting process has achieved full-automation or semi-automation. With one single mold, one die casting machine even can produce thousands of identical castings in few days, of which other thermoforming processes are impossible to achieve.

Get A Free Quotation For Your Die Casting Medical Equiment Parts

As one of the leading die casting companies in China, Dolin Casting can produce medical equipment parts exactly fit your needs. Contact us today to get a free quotation and learn more information of our die casting medical equipment parts manufacturing capability.